File Manager
| Current Path : /usr/share/crm114/ |
|
|
| Current File : //usr/share/crm114/mailfilter.cf |
# mailfilter.cf -- Config file for mailfilter, mailreaver, mailtrainer
#
# You MUST edit the fileds for "Secret Password", "mime decoder", and
# "cache_dupe_command". Just those THREE things.
#
# Changes to all other values are optional.
#
# Many of the options here have two or three alternatives; for your
# convenience, we have put all of the reasonable alternatives
# on sequential lines. Uncomment the one you want, and leave the
# others commented out. If you leave more than one uncommented, the
# last one is the one that's used. Don't do that; it's ugly.
#
# After you edit this file, don't forget to edit 'rewrites.mfp'
# --------->>> You MUST set the following correctly! <<<-------
#
# If you leave it as "DEFAULT_PASSWORD", you will not be able to
# access the mail-to-myself commanding system, as "DEFAULT_PASSWORD"
# is specifically _disabled_ as a legal password. Just pick something, eh?
#
:spw: /DEFAULT_PASSWORD/
# ----- If you want a verbose startup, turn this on. Note that this is
# ----- intentionally _after_ the password is set, so a verbose startup
# ----- will not reveal your password.
#
#:verbose_startup: /SET/
:verbose_startup: //
#
# --------->>> You MUST set the following correctly! <<<-------
#
# --- Some mail systems do mime decoding with "mimencode -d" or "-u".
# --- Others (such as Red Hat 8.0) use "mewdecode" .
# --- Yet others (such as Fedora Core 3) use "openssl base64 -d" .
# --- Yet Others (i.e. *BSDs) can use "base64" .
# --- See which one is on your system and use that one- comment
# --- the others out. If you can't figure out what your base64 mime
# --- decoder is, or don't want mime decoding, set :do_base64: to /no/
# --- but expect a significant accuracy decrease if you do this.
#
#:do_base64: /no/
:do_base64: /yes/
#
#:mime_decoder: /mewdecode/
#:mime_decoder: /mimencode -d/
#:mime_decoder: /mimencode -u/
#:mime_decoder: /base64 -d/
:mime_decoder: /openssl base64 -d/
#:mime_decoder: /normalizemime/
# --------->>> You MUST set the following correctly! <<<-------
#
# --- Linux (and Unix) systems use "hardlinks" to make a file
# --- appear in more than one place, while not actually using up
# --- extra disk space. Sadly, it is the case that most
# --- Windows systems have no such feature. So, you must set the
# --- following for what kind of system you are actually using.
# -- Note to other developers: here's where to put other system-dependent
# -- syscall commands.
#
# --- Use the default /ln/ for LINUX and UNIX systems (does a hard-link,
# --- does not use up disk space or inodes). Change this to the /copy/
# --- command for WINDOWS systems (95, 98, NT, XP)
#
# --- Mild security issue: to avoid a theoretical exploit where a user
# --- gets their commands re-aliased, make sure you use the fully qualified
# --- commandname (that is, starting in the root directory).
#
:cache_dupe_command: /\/bin\/ln/
#:cache_dupe_command: /copy/
###########################################################################
#
# END of things you absolutely MUST set. Feel free
# to keep reading though...
#
###########################################################################
###########################################################################
#
# START of things you might likely want to set. These
# are probably OK for you, but many users change these things.
#
##########################################################################
# ----------- define an optional target for where to send spam (that is,
# ------------ emails that we want to "fail", or reject to another
# ------------ address. Note that this is NOT a "program fault" address,
# ------------ but where to send "bad" email to in the general case.
# ------------ You can specify tightly controlled conditions too,
# ------------ (see the next stanza)
# ----------- To NOT forward this to another account, just leave the
# ----------- address as the empty string, which is '//'.
# ----------- This works fine especially if your mail reader program
# ----------- can sort based on the ADV and UNS (or whatever you choose
# ----------- to use as flagging strings) in the "Subject:" field.
# ------- CAUTION- some systems are buggy and _REQUIRE_ a user@host.domain
# ----- in the following to forward spammy mail correctly. WTF??? :-(
#
#:general_fails_to: /somebody@somewhere.net/
:general_fails_to: //
# -------- If you would prefer to send specific kinds of spam to
# -------- different mailboxes, here's where to do it.
# -------- (be sure to uncomment the line!). Again, these are
# --------- not "program fault" conditions, just different filter results.
#
# :fail_priority_mail_to: /where_priority_fails_go/
# :fail_blacklist_mail_to: /where_blacklist_fails_go/
# :fail_SSM_mail_to: /where_Classifier_fails_go_for_mailFILTER/
# :fail_classify_mail_to: /where_classifier_fails_go_for_mailREAVER/
# --------- Do we give nonspam, spam, and unsure an exitcode of 0
# --------- (for most standalone apps) or something else?
# --------- Usually we use an exit code of 1 for "program fault",
# --------- but change it if you need to use 0/1 for good/spam
# --------- Don't use an exit code greater than 128 (it breaks BASH!)
# --------- If you use exit codes (procmail doesn't) change it here.
:rejected_mail_exit_code: /0/
:accepted_mail_exit_code: /0/
:unsure_mail_exit_code: /0/
:program_fault_exit_code: /1/
#######################################################################
#
# END of things you are likely to want to change.
#
# Anything following is starting to approach true customization.
# Feel free to explore and poke around.
######################################################################
# -----------Do we want to add the optional headers to the mail?
# -----------If turned on, will add X-CRM114-Whatever: headers on each
# -----------incoming email. (note- this does NOT turn off the cache-id header
#
:add_headers: /yes/
#:add_headers: /no/
# --------- do we add the statistics report?
:add_verbose_stats: /yes/
#:add_verbose_stats: /no/
# --------- do we add the mailtrainer report to the top of the message body
# --------- after training?
:add_mailtrainer_report: /yes/
#:add_mailtrainer_report: /no/
# --------- Do we enable long-form explains (with lots of text)?
# -- you can have no extra stuff, add it as text, or add it as an attachment.
# -- (only available in mailfilter, not mailreaver)
#
:add_extra_stuff: /no/
# :add_extra_stuff: /text/
# :add_extra_stuff: /attachment/
# --------- Do we want to insert a "flagging" string on the subject line,
# --------- perhaps to insert an 'ADV:' ? Whatever string we put here
# --------- will be inserted at the front of the subject if we think the
# --------- mail is spam.
#
# :spam_flag_subject_string: //
:spam_flag_subject_string: /ADV:/
# --------- Do we want to insert a "flagging" string on the subject line
# --------- for good email? Usually we don't.... so we set this to the
# --------- null string - that is, //
:good_flag_subject_string: //
# ------------Similarly, do we want to insert a "flagging" string on
# -------------the subject line of an "unsure" email? This way we know
# --------------we need to train it even if "headers" is turned off.
# :unsure_flag_subject_string: //
:unsure_flag_subject_string: /UNS:/
# ------------- Do we want Training ConFirmation flags on the results of
# ------------- a message to be learned? Default is "TCF:".
:confirm_flag_subject_string: /TCF:/
#:confirm_flag_subject_string: //
# --------- Do we want to do any "rewrites" to increase generality and
# ---------- (usually) accuracy? IF 'yes', be sure to edit rewrites.mfp!
# --------- NOTE: this option is somewhat slow. If your mailserver is
# --------- maxed out on CPU, you might want to turn this off.
#
:rewrites_enabled: /yes/
#:rewrites_enabled: /no/
# --------- Do we copy incoming text into allmail.txt ? default is yes, but
# --------- experienced users will probably set this to 'no' after testing
# --------- their configuration for functionality.
#
:log_to_allmail.txt: /yes/
# :log_to_allmail.txt: /no/
# ------- Another logging option - log all mail to somewhere else
# ------- entirely. Whatever pathname is given here will be prefixed
# ------- by :fileprefix:
# ------- To not use this, set it to the null string .. //
# ------- Remember to backslash-escape path slashes!
:log_all_mail_to_file: //
#:log_all_mail_to_file: /my_personal_mail_log_file_name.txt/
# --------- When we log messages, should we use a mail separator?
# --------- And, if so, what?
:mail_separator: /\n-=-=-=-=-=-=- cut here -=-=-=-=-=-=-\n/
#
# ---------- Message Cacheing for retraining - do we keep a cache of
# ---------- messages we've classified recently "in the wild" as retrain
# ---------- texts? This uses up some disk space, but means that we can
# ---------- use mailtrainer.crm on these messages to autotune the classifier.
# ---------- Default is to cache into the directory reaver_cache ;
# ---------- if you don't want this, set it to // . If you don't use this,
# ---------- you can't really use mailtrainer.crm, and you must keep your
# ---------- headers scrupulously clean in all train messages. Recommended
# ---------- to leave this unchanged unless you are VERY short of disk.
#
:text_cache: /reaver_cache/
# :text_cache: //
# ----- How do we invoke the trainer (as in, just the invocation
# ------ of CRM114 on mailtrainer.crm. Usually this is just obvious,
# ------- but if you don't have CRM114 installed in the search path, here's
# -------- where you can set trainer invocation to be via whatever path
# --------- you want it (the second example is if you haven't installed
# ---------- CRM114 at all, but are running the crm114_tre static binary
# ----------- right out of the local directory.)
#
# -- use this next one if you have installed CRM114 with "make install"
# -- (This is preferred and is the default)
:trainer_invoke_command: /.\/mailtrainer.crm/
#
# -- use this one if you can't do a "make install" and so must run the
# --- crm114_tre binary directly out of the current working directory.
# :trainer_invoke_command: /.\/crm114_tre mailtrainer.crm /
# ------ If we're cacheing for retraining, we're probably using
# ------ mailtrainer.crm or some other variant. In that case,
# ------ you will want a "randomizer" to present the training
# ------ examples to the classifier in some random but balanced order.
# ------ You have two choices - you can either use the "sort"
# ------ command on some random character in the filename (this
# ------ is NOT recommended) or use the "shuffle.crm" program.
# ------ We _strongly_ recommend using shuffle.crm; the default
# ------ options to shuffle.crm will work fine. Alternatively,
# ------ you can use the "sort --key 1.2" on date-named files to
# ----- achieve chronological training
:trainer_randomizer_command: /.\/shuffle.crm/
#:trainer_randomizer_command: /.\/crm114 shuffle.crm/
#:trainer_randomizer_command: /sort --key 1.2/
# --------- Do we log rejected mail to a file? default yes, but most
# --------- users should set this to no after testing their
# --------- configuration to verify that rejected mail goes to the
# --------- reject address. Only works in mailfilter.crm
#
:log_rejections: /yes/
#:log_rejections: /no/
# ------- alternate rejection logging - set this pathname to non-null
# ------ to log rejections elsewhere. Only for mailreaver.crm.
# ----- Set to NULL ( // ) to turn this off.
:log_rejections_to_file: //
#:log_rejections_to_file /this_is_my_rejected_email_log_file.txt/
# ----------Do we want to enable "inoculation by email"?
# --------(leave this off unless you want RFC inoculations)
#
:inoculations_enabled: /no/
#:inoculations_enabled: /yes/
# --------- How many characters of the input do we really trust to be
# ---------- worthy of classification? Usually the first few thousand
# ----------- bytes of the message tell more than enough (though we've
# ------------ been "noticed" by spammers, who are now packing 4K of
# ------------- innocuous text into their headers. No problemo... :) )
#
#:decision_length: /4096/
#:decision_length: /64000/
:decision_length: /16000/
# ----- for entropy users ONLY - 4K is plenty!
#:decision_length: /4096/
# ------------ Do we want to expand URLs (that is, fetching the contents
# ------------- of a URL and inserting that after the url itself?)
# -------------- By default this is off, but turn it on if you want
# --------------- to experiment.
:expand_urls: /no/
# :expand_urls: /yes/
#
# WGET options - 30-second timeout, output to stdout.
# HACK - use the proper --user-agent="IEblahblah" for max effect!
:url_fetch_cmd: /wget -T 30 -O - /
# and trim the URL text to not more than 16bytes of text.
:url_trim_cmd: / head -c 16000 /
#######################################################################
#
# ------------------- YOU REALLY SHOULD STOP HERE -------------------
# --------- values below this line are usually OK for almost all
# --------- users to use unchanged - Gurus only beyond this point.
#
#######################################################################
#
# If you want to change things here, go ahead, but realize you are
# playing with things that can really hurt accuracy.
#
# This being open source, if you don't *think* about changing it,
# what would be the use of it being open source? That said, this
# _is_ open source- you break it, you get to keep _both_ pieces!
#
#
# ------------ CLF - The Classifier Flags ----------
#
# --------- Which classifier flags do we use? Default for 20060101 has
# --------- been changed to OSB UNIQUE MICROGROOM.
#
# --------- A null setting gets you straight Markovian, without
# --------- microgrooming. OSB uses less memory, is faster,
# --------- and is usually more accurate. Correlative matching is
# --------- 100x - 1000x slower, but can match anything (binaries,
# --------- wide chars, unicode, virii, _anything_. Winnow is a
# --------- non-statistical learning classificer with very nice
# --------- accuracy (up to 2x SBPH). Hyperspace is a pseudogaussian
# --------- KNN (K-nearest-neighbor) matcher.
#
# --------- This is also where we set whether to use microgrooming
# --------- or Arne optimization (they're currently mutually exclusive).
# --------- If you turn off microgrooming you get Arne optimization
# --------- automatically.
#
# --------- If you _change_ this, you _must_ empty out your .css or
# --------- .cow files and build fresh ones, because these
# --------- classifiers do NOT use compatible data storage formats!
#
#:clf: /microgroom/
#:clf: /osb/
#:clf: /osb microgroom/
:clf: /osb unique microgroom/
#:clf: /correlate/
#:clf: /winnow/
#:clf: /osbf/
#:clf: /osbf microgroom/
#:clf: /hyperspace/
#:clf: /hyperspace unique/
#
#
#
# --------Thresholds for GOOD/UNSURE/SPAM thick-threshold training
# -------
# ------ A very small thick threshold (or zero!) works for Markovian.
# ----- A thick threshold of 5 to 20 seems good for OSB, OSBF,
# ---- Hyperspace, Bit-Entropy, and Winnow. If you want an asymmetric
# --- threshold system, you can do that by having :good_threshold:
# -- be different from :spam_threshold:. The defaults are +/- 10.0
#
#
# ---- Things rated equal to or better than this are GOOD email
#:good_threshold: /0.01/
:good_threshold: /5.0/
#:good_threshold: /10.0/
#:good_threshold: /20.0/
#
# ---- Things rated less than or equal to this are SPAM
#:spam_threshold: /-0.01/
:spam_threshold: /-5.0/
#:spam_threshold: /-10.0/
#:spam_threshold: /-20.0/
# ---- mailfilter uses a single threshold and operates symmetrically.
# --- (this is only to provide backward compatibility)
:thick_threshold: /5.0/
# ---- What regex do we use for LEARN/CLASSIFY? the first is the
# ---- "old standard". Other ones are handy for different spam
# ---- mixes. The last one is for people who get a great deal of
# ---- packed HTML spam, which is almost everybody in 2003, so it
# ---- used to be the default. But since spammers have shifted away
# ---- from this, it isn't the default any longer. IF you change
# ---- this, you MUST rebuild your .css files with decent
# ---- amounts of locally-grown spam and nonspam ( if you've been
# ---- following instructions and using the "reaver" cache, this is
# ---- easily done! )
#
:lcr: /[[:graph:]]+/
#:lcr: /[[:alnum:]]+/
#:lcr: /[-.,:[:alnum:]]+/
#:lcr: /[[:graph:]][-[:alnum:]]*[[:graph:]]?/
#:lcr: /[[:graph:]][-.,:[:alnum:]]*[[:graph:]]?/
#
# this next one is pretty incomprehensible, and probably wrong...
#:lcr: /[[:print:]][/!?\#]?[-[[:alnum:]][[:punct:]]]*(?:[*'=;]|/?>|:/*)?
#
#
# Expansions for antispamming. You almost _always_ want these on,
# unless you're debugging something really bizarre.
# --------- Do we enable spammus interruptus undo?
:undo_interruptus: /no/
#:undo_interruptus: /yes/
#
#
#
# ------------ HIGHLY EXPERIMENTAL - automatic training!
# enable this only if you really want to live VERY dangerously!
# "Do you feel lucky today, punk? Well, do ya?"
#
:automatic_training: /no/
#
# ---- if you are living dangerously and have turned on autotraining,
# you should also set the following to point to an address that
# will get read on a quick basis, becuause this is where autotrain
# verifications will go.
#
#:autotrain_address: /root/
#
File Manager Version 1.0, Coded By Lucas
Email: hehe@yahoo.com